Filter
Top Products
14
PAGE HEADER.....
COOKING WITH YOUR BREVILLE SMART FRYER™
Twice Fried Chips
When TWICE FRIED CHIPS mode is
selected and confirmed by pressing the
SCROLL/SELECT knob, 1ST FRY/2ND FRY
displays.
1. Select 1ST FRY by highlighting and
pressing SCROLL/SELECT knob to
confirm. 1ST FRY flashes to indicate it is
the selected option. Once the selection
has been confirmed, the unselected
option display turns off. After TWICE
FRIED CHIPS and 1ST FRY have been
selected, the fryer will automatically set
the time and temperature.
NOTE
For TWICE FRIED CHIPS, FRESH is
the only available option as frozen
chips have been precooked.
2. Start the heating process by pushing the
START/CANCEL button. The display
will turn orange to indicate heating.
TWICE FRIED CHIPS, FRESH, 1ST FRY,
HEATING and the actual temperature of
the oil will be displayed.
The deep fryer will now preheat the oil.
Once the deep fryer has reached the
correct temperature, the deep fryer will
beep once to indicate it is ready to cook.
PRESS TIMER will display.
3. Lower the basket of fresh chips into the
oil and press the TIMER button. When
the TIMER button is pressed, the timer
will start to count down, and the cooking
process begins.
NOTE
The fryer is programmed to heat to
the correct overshoot temperature
because when the cooler chips are
lowered into the oil, the temperature
of the oil will fall. The overshoot
temperature ensures that the chips
cook at the optimal temperature,
even after they initially cause the oil
temperature to drop.
When the timer finishes counting down,
the alarm will sound to signal the end of
the cooking cycle. PRESS TIMER, TWICE
FRIED CHIPS, 1ST FRY and FRESH, the
time and temperature will be displayed.
4. Push the TIMER button to stop the
alarm and raise the basket. The deep
fryer will automatically begin to reheat.
Once the deep fryer has reached the
correct temperature, it is ready to
proceed.
NOTE
In TWICE FRIED CHIPS mode it
is possible to adjust the timer and
temperature once the timer has
started but it is not possible to switch
between 1ST FRY and 2ND FRY
At this point, the fryer is able to proceed to
either the 2ND FRY or to another 1ST FRY
of a second batch of chips, depending on
the total quantity to be fried. TWICE FRIED
CHIPS, FRESH, FIRST FRY, PRESS TIMER,
the time and cooking temperature display.
NOTE
If a second batch of chips is to be
cooked, Breville recommends to 1ST
FRY both batches and then proceed
to the 2ND FRY for both batches.
This process means less heating and
cooling of oil, providing better results
and is more time efficient.