Filter
Top Products
EN
11
Blinking light: heating up
Steady light: ready
To enter the descaling mode, at slider
closed push all the 3 controls simultane-
ously for at least 3 sec. A short beep will
conrm it. Open the slider.
Push all the 3 controls simultane-
ously for at least 3 sec. A short beep will
conrm it. The control area will start
blinking quickly.
Close the slider to start descaling.
Machine stops when water tank is
empty.
Rell the water tank with the used des-
caling solution collected in the container
and touch any control to repeat the
procedure.
To exit the descaling mode, push all the 3
controls simultaneously for at least 3 sec. A
short beep will conrm this. The machine is
now ready for use.
When ready, touch any control to rinse
the machine. Machine will stop when
done.
Empty and rinse the water tank, capsule
container, drip tray and cup support
thoroughly. Fill water tank with potable
water.
1
2
15
16
2
1
18
19
111110
112
17
max.
3 sec
3 sec