Breville BEC300 Coffeemaker User Manual


 
EN
6
FIRST USE
Remove the water tank and capsule
container. Adjust the cable length and
store the excess under the machine.
Insert the remaining cable in the guide
under water tank left or right socket,
depending on the position chosen for
the water tank. Ensure machine is in the
upright position.
Plug the machine into the mains. Rinse the water tank before lling it with
potable water.
Place a container under coee outlet.
Press the Lungo control. Close the slider
to rinse the machine. Repeat three
times.
Turn the machine ON by opening the
slider and pushing it towards the back
of the machine. Light will blink on one
of the coee touches: heating up for
approximately 25 seconds Steady light:
ready.
The machine can be turned into O
mode at any time by pushing and
holding any touch control for more than
3 sec., conrmed by the other 2 controls
ashing.
Place the water tank on its arm, it is
xed with magnets. Insert the drip tray
and the capsule container in position.
For your safety, operate the machine
only with drip tray and capsule con-
tainer in position.
First read the safety precautions to avoid risks of fatal electrical shock and re.
11
12 13 14
15 16
18
>3 sec
17