Filter
Top Products
9
ASSEMBLING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Before using the Juice Extractor for the
first time, remove and safely discard any
packaging material and promotional labels.
Ensure the power cord is unplugged from
the wall outlet.
Wipe the Motor Base with a damp cloth.
Dry thoroughly.
Wash the Filter Bowl Surround, Filter Basket,
Juicer Cover, Food Pusher, Juice Jug and
Pulp Container in warm soapy water with
a soft cloth or nylon brush. Rinse and dry
thoroughly.
NOTE
These parts are not dishwasher safe.
1. Place the Motor Base on a flat dry
surface such as a counter-top. Ensure the
power cord is unplugged from the
wall outlet.
2. Place the filter bowl surround on top of
the motor base. Align the arrows to the
ALIGN position then turn slightly to
the left to the ALIGN/LOCK (closed)
position.
3. Underneath the Filter Bowl Surround is
the pulp extraction silicon, which is used
to remove the pulp from the spout of the
juicing bowl. Ensure that the silicon is
firmly inserted into the juicing spout.
4. Assemble the filter basket into the
scraper wiper then place this assembly
in to the juicing bowl.
5. Note that the orange dot on the filter
needs to align with the orange dot on
the juicing bowl and motor base. Ensure
that the filter basket is completely
pushed down.