Filter
Top Products
12 13
CARE & CLEANING
CARE & CLEANING
Always switch Off at the power outlet and
unplug the appliance from the power outlet
before cleaning.
REMOVABLE FILTER
The kettle features a removable mesh filter
to remove scale deposits for cleaner water.
To clean the scale deposits from the filter,
open the lid and slide the filter out from the
slot behind the spout of the kettle.
The filter can be cleaned by placing under
running water and rubbing with a cleaning
cloth or brush.
To replace the filter, simply slide the filter
into the slot behind the spout of the kettle
and push back into position.
NOTE
The filter could become damaged
with time. Please check regularly and
replace if found damaged.
NOTE
The concealed element in the base of
the kettle is made from high quality
stainless steel. Any brown stains
appearing are the result of mineral
deposits and are not rust.
REMOVAL OF MINERAL DEPOSITS
Mineral deposits in tap water may cause
the kettle interior and water gauge to
discolour over time. This may be removed
by using Breville Kettle Cleaner (BKC250)
or a proprietary kettle descaler which is
available from most leading supermarkets,
department stores and hardware stores.
BREVILLE KETTLE CLEANER
Directions for use:
1. Add 125ml of Breville Kettle Cleaner to
2 litres of water.
2. Fill kettle to MAX mark with mixture
on a protected surface.
3. Bring kettle to boil and let stand for
30 minutes.
4. Clean spout by using a cloth dampened
with Breville Kettle Cleaner, rub well.
Then wipe off.
5. Bring the kettle to boil for a second time,
then empty solution.
6. Fill kettle with fresh water and bring to
the boil, discard boiled water. Now your
kettle is ready to make your next cup of
tea or coffee.
Alternatively:
1. Fill the kettle until ²
/
³
full with 1 part
vinegar and 2 parts water. Boil and allow
to stand overnight.
2. Empty the solution from the kettle. Fill
the kettle with clean water, bring to boil
and discard the water.
3. Repeat and the kettle will be ready
for use.
WARNING
Never immerse the kettle base, switch
area, power base, power cord or power
plug in water, or allow moisture to come
into contact with these parts.