Filter
Top Products
9
FEATURES OF YOUR BREVILLE PRODUCT
FEATURES
of your Breville product
VARIABLE TEMPERATURE CONTROL
The electronic control panel offers five
different settings for optimal tea and
coffee brewing: 80°C , 85°C , 90°C , 95°C
and 100°C.
GREEN
TEA
WHITE
TEA
OOLONG
TEA
COFFEE BLACK
TEA
80°C 85°C 90°C 95°C 100°C
NOTE
This product is not calibrated
for commercial or scientific use.
Temperatures may vary +/-5 degrees,
being within range for optimal
brewing for each type of tea or coffee.
OPTIMAL BREWING
Tea varieties are grown and produced in
many different environments and require
different water temperatures to allow their
unique flavour and aroma to develop during
brewing. To bring out the optimal quality
and taste of more delicate tea leaves, a lower
temperature will produce a better flavoured
cup of tea. For example, steeping green,
white or oolong teas in boiling water may
scald the tea leaves and result in a bitter,
astringent brew.
Brewing the tea for too long may also result
in a bitter, unpleasant taste, while brewing
for too short a period may leave the tea
bland. For best results always follow the
specific directions on the tea/coffee packet.
To bring out the optimal taste and quality of
your favourite tea or coffee, we recommend
that you use your Breville Smart Kettle™ at
the suggested temperature for your selected
tea or coffee.
The Variable Temperature Control Table
on Page 10 provides a guide to a range
of tea and coffee varieties and the
recommended temperature to select on the
control panel of the Breville Smart Kettle™.
KEEP WARM FUNCTION
The Breville Smart Kettle™ offers a
convenient KEEP WARM function that can
be used before, during or on completion of
the water heating cycle. When the water has
reached the selected Celsius temperature,
the KEEP WARM function will hold the
selected temperature for 20 minutes. If the
100° button is selected when using the KEEP
WARM function, the boiled water will remain
at approximately 95° Celsius for 20 minutes.
To activate the KEEP WARM function,
first press the desired water temperature
button from the five options on the control
panel. Then press the KEEP WARM button,
followed by the START/CANCEL button to
commence heating the water. Alternatively,
the KEEP WARM button can be activated
at any time during the heating cycle and/
or within one minute after the heating cycle
has completed.
If the kettle is removed from the power base
during the KEEP WARM function the kettle
will automatically switch off.
NOTE
If temperature is changed during
the KEEP WARM function, the
START/CANCEL button surround
will illuminate in red.