Breville Breville Blender User Manual


 
13
OPERATING YOUR BREVILLE HEMISPHERE™ CONTROL BLENDER
FUNCTION PROGRAMMED TIME
Blend 60 seconds (1 minute)
Smoothie 60 seconds (1 minute)
Ice / Auto Pulse 60 seconds (1 minute)
When ‘00’ seconds is reached, the blender
will automatically cease to operate and
the function button and STOP button
illumination will go out. The button
will illuminate and flash.
NOTE
The smoothie function has a unique
processing technique that blends the
denser ingredients at a lower speed,
then increases as ingredients thicken.
This may happen several times while
blending smoothies.
To stop blending at any time, press the
STOP button or the selected function
button. The button can also be
pressed, but this will also turn the appliance
off and all illuminations will go out.
The maximum amount of ice cubes the
blender can blend at any one time is 1
standard ice tray or 250g.
WARNING
Never place anything other than food
and liquids in the blender while the
motor is running.
Step 9
For ingredients that require short bursts
of power, select the PULSE function. The
PULSE button will illuminate and remain
illuminated while the button is depressed.
When this function is selected, the LCD
timer screen will illuminate and count
upwards in one second increments during
pulsing. Press the PULSE button in short
bursts until blending is complete.
NOTE
Use the PULSE button when the
food that is being processed is too
thick or coarse to circulate within the
blender jug.
Step 10
At the end of use, always ensure the blender
is turned off by pressing the button
on the control panel. Then unplug the
cord. Ensure the motor and blades have
completely stopped before attempting to
move the appliance, or when the Breville
Hemisphere
Control Blender is not in use
and before disassembling, cleaning and
storing.
NOTE
• During the blending process,
ingredients may stick to the sides
of the blender jug. To push the food
back onto the blades, press the
button on the control panel
to turn blender off and remove the
power cord. Remove the lid and use
a plastic spatula to scrape down
the sides of the jug. Replace the lid
before recommencing blending.
• If any moisture or liquid appears
on top of the motor base during
blending, press the button on
the control panel, and remove the
power plug. Remove the blender jug.
Wipe the motor base immediately
with a dry cloth or paper towel to
absorb the liquid. Check the blender
jug is correctly assembled.
• Never place anything other than
food and liquids in the blender while
the motor is running.