Filter
Top Products
10
PAGE HEADER.....OPERATING YOUR BREVILLE ‘LIFT & LOOK’™ TOUCH
Before first use, remove any packaging
material or promotional labels attached to
your toaster.
1. Insert the power plug into a 110/120V
power outlet. The TOAST/CANCEL
button surround will illuminate in white.
The LED toasting progress indicator
will illuminate in red from left to right,
then align to the selected browning
setting (indicated by the position of
the browning control slide). The toaster
will revert to stand-by mode after 30
seconds if a button is not pressed or the
browning control slide is not adjusted.
NOTE
When using the toaster for the first
time, we suggest toasting on the
maximum setting without bread.
The toaster may emit a thin smoke
or distinct odor on initial use. This
is normal and not detrimental to the
performance of the toaster.
2. Place 1 slice of bread, 1 bagel or half an
English muffin only, into each of the
toasting slots.
Ensure items for toasting are not
too large or too thick to fit in the
toasting slots.
3. Select the desired browning setting by
adjusting the browning control slide on
the front of the toaster. The browning
settings range from ‘1’ (lightest) to ‘5’
(darkest). The LED toasting progress
indicator will illuminate in red and
align to the selected browning setting
(as indicated by the position of the
browning control slide).
NOTE
When toasting bread for the first
time, it is suggested to toast on
browning setting ‘3’. Various types of
bread and personal preference may
require a different browning setting.
For example, raisin toast and white
light-textured breads may require
a lighter setting, while heavier
textured rye breads may require a
darker setting.
4. To start the toasting process, press the
TOAST/CANCEL button on top of the
toaster. The TOAST/CANCEL button
surround will illuminate in red and the
carriage will automatically lower into the
toasting slots which starts the toasting
cycle. As the carriage automatically
locks into position, the 'LIFT & LOOK'™
button surround will illuminate in white
and the LED toasting progress indicator
(above the selected browning setting)
will flash and start to gradually count
down (towards the left) indicating the
toasting progress.
5. The 'LIFT & LOOK'™ button can be
pressed up until 10 seconds before the
end of the toasting cycle to view the
browning of the bread. When selected,
the 'LIFT & LOOK'™ button surround
will flash and the LED toasting progress
indicator will remain steady (indicating
that the selected browning setting has
not been interrupted by the carriage
rising). The toasting recommences
immediately as the carriage lowers and
locks into position, and as indicated by
the 'LIFT & LOOK'™ button surround
illuminating and the LED toasting
progress indicator flashing.