Breville BTA630XL Toaster User Manual


 
11
PAGE HEADER.....OPERATING YOUR BREVILLE ‘LIFT & LOOK’™ TOUCH
6. Approximately 10 seconds before the
end of the selected browning setting,
the 'LIFT & LOOK'™ button will cease
illumination. As the toasting stops and
the carriage rises, the TOAST/CANCEL
button surround will flash and the LED
toasting progress indicator will cease
flashing. The LED toasting progress
indicator will re-illuminate to the
previously selected browning setting.
7. Once the toasting cycle has completed
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the toast. The
TOAST/CANCEL button surround
will re-illuminate in white for up to 30
seconds, ready for the next toasting
cycle. The toaster will revert to stand-by
mode after 30 seconds.
NOTE
The toaster will revert to stand-by
mode after 30 seconds if a button is
not pressed or the browing control
slide is not adjusted.
The TOAST/CANCEL button
surround and LED toasting progress
indicator will cease illumination.
NOTE
The toaster will re-activate from
stand-by mode and the
TOAST/CANCEL button surround
and LED toasting progress indicator
will illuminate when:
A. Any of the buttons are pressed.
B. The browning control slide
is moved.
WARNING
Do not leave the toaster unattended
when in use as toast may jam.
In the unlikely event that bread,
bagels or toaster pastries become
jammed in the toasting slots, all the
buttons and the LED toasting progress
indicator will flash and the elements
will turn off. Remove the power plug
from the power outlet and allow the
toaster to cool completely before
carefully easing the bread out of the
slots. Take care not to damage the
heating elements.
TOAST/CANCEL BUTTON
The TOAST/CANCEL button surround will
illuminate in white for up to 30 seconds
when the appliance is turned on. The
toaster will revert to stand-by mode after
30 seconds if a button is not pressed or the
browning control slide is not adjusted.
Press the TOAST/CANCEL button
once to lower the carriage and start the
toasting process.
The TOAST/CANCEL button surround
will then illuminate in red.
Press the TOAST/CANCEL button
during operation to cancel the toasting
process or any other function. The
TOAST/CANCEL button illumination
will change from red to white and stay
illuminated for up to 30 seconds.
NOTE
Toasting can be stopped at any time
by pressing the TOAST/CANCEL
button located on the top of the
toaster. This will cancel the operation
and the carriage will move to the
raised position.