Filter
Top Products
APE1 SERIES
Page 4
CONNECT THE WIRING
HE0059
9 Connect House Power Cable to range hood wiring -
BLACK to BLACK, WHITE to WHITE, and GREEN or
BARE WIRE to GREEN Ground Screw.
HOUSE
POWER
CABLE
GREEN
GROUND
SCREW
10 Re-install the wiring cover, bottom cover, and filters that
were removed in Step 3.
COMPLETE INSTALLATION
1 Pull the Tab on the Light Lens forward to remove the
lens.
LAMP REPLACEMENT
2 Grasp Lamp at Lamp Base, tilt lamp down and pull out to
remove.
3 Replace lamps. Use a 42 W Fluorescent Lamp,
GX24Q-4 and tilt lamp up into position. For Night Light,
use a 4 W, C-7 bulb.
4 Place front edge of light lens into Slot. Push lens up and
snap it into place.
TAB
LIGHT
LENS
LAMP
BASE
LAMP
NIGHT
LIGHT
FLUORESCENT
LAMP
SLOT
CAUTION: Bulb may be hot! Refer to packaging for
further information.