Filter
Top Products
- 8 -
11.LIGHT BULBS
This hood must use 120V, 50W max., type MR16, GU10 shielded halogen lamps. (Purchase separately).
NOTE: The rings must be removed from bottom banel before installing halogen lamps.
WARNING
In order to prevent the risk of personal injury, do not install a lamp identified for use only in
enclosed fixtures.
!
WARNING
In order to prevent the risk of personal injury, the halogen
lamps must be cooled down before removing them.
!
11.1 Install the lamps by placing the bulb leads into their grooves in the socket
and gently push upward and turn clockwise until secured.
HE0047
11.3 To remove lamps, gently push upwad and turn counterclockwise to
disengage bulb leads from their grooves.
HE0047
11.2 Install trim rings by pushing upward.
HO0034