Filter
Top Products
- 7 -
FLUE MOUNTING
BRACKET
MOUNTING SCREWS
=
=
CONNECT DUCTWORK
Ducted Configuration
1. Adjust the width of the flue mounting
bracket to equal the inside width of
decorative flue. Insert and tighten
mounting screws to hold bracket width.
2. Use mounting screws and wall anchors to
secure flue mounting bracket to the
ceiling as shown.
3. Use 6" round metal duct to connect the
duct collar on the hood to the ductwork
above.
4. Use duct tape to make all joints secure
and air tight.
5. Insert the decorative flues setting them on
the hood.
6. Extend the upper flue to the ceiling and
secure with two mounting screws.
6" ROUND
METAL DUCT
DUCT TAPE
DECORATIVE
FLUE
FASTEN
FLUE TO
UPPER
BRACKET
WITH
MOUNTING
SCREWS
MOUNTING SCREWS