Filter
Top Products
Page 10 B101278-2-1008
1. Mount grill onto cart, post or base per the mounting in-
structions.
2. Place radiation shield (13) (flange side up) onto four
raised bosses located on the interior bottom of the grill.
Secure with four 1/4-20 x 3/4 screws. See Figure 1.
3. R3B model only: Slide ignitor spacer (11) onto collec-
tor box assembly (10) and secure with nuts.
See Figure 2.
Attention: Do not cut or damage ignitor wires.
GRILL ASSEMBLY
Figure 1
4. R3B model only: Insert collector box assembly into
hole adjacent to burner. The opening of the collector
box should be facing the burner. The infrared ignitor
wire slides through the empty hole next to the burner.
See Figure 3.
Figure 2
Figure 3
R3B
R3