Filter
Top Products
17
FLA
VO
R
IN
PU
T
1
2
W
A
T
E
R
IN
P
UT
R
EF
ILL
M
AIN
PO
W
E
R
2 1
1
2
3
3
3
FLA
V
O
R
O
UTP
UT
FLA
VO
R
O
U
TP
UT
W
A
T
ER
O
U
TP
UT
FLA
VO
R
O
UTP
U
T
W
A
T
ER
O
UTP
U
T
W
A
T
ER
O
UTP
U
T
SERVICE (cont.)
SOLENOID (WATER) ON/OFF SWITCHES
FIG.18 SOLENOID (WATER) ON/OFF SWITCHES
P1521
Location:
The solenoid (water) ON/OFF switches are located
on the switch mounting plate inside the autofill box on
the right side.
Test Procedure:
1. Disconnect the dispenser from the power source.
2. Disconnect the wires from the switch to be test-
ed.
3. Check for continuity across the terminals on the
switch when it is held in the on position. Continuity
must not be present across these terminals in the
released position.
If continuity is present as described, refer to Fig. 19
and reconnect the wires to the switch.
If continuity is not present as described, replace the
switch.
FIG. 19 SOLENOID (WATER) SWITCH
TERMINALS
P1524
BLKfromPumpSwitch#2
BLKtoPumpSwitch#1
BLU to Test/Operate Switch
BLU to to Solenoid #1
BLKfromMainON/OFFSwitch
BLKtoPumpSwitch#2
VIO to Test/Operate Switch
VIO to Solenoid #2
#1 AFPO-2 & 3
#2
AFPO-2 & 3
BLKfromPumpSwitch#3
WHI/VIO to Test/Operate Switch
WHI/VIO to Solenoid #3
#3 AFPO-3 ONLY
Removal and Replacement:
1. Remove the wires from the switch terminals.
2. Compress the clips inside the autofill box and gently
push the switch through the opening.
3. Push the new switch into the opening and spread
the clips to hold switch in the autofill box.
4. Refer to Fig. 19 when reconnecting the wires.
41093 040408