Filter
Top Products
BUNN Espress™
ES•2A™/ES•2SA™
12
TROUBLESHOOTING
A troubleshooting guide is provided to suggest probable causes and remedies for the most likely problems
encountered. If the problem remains after exhausting the troubleshooting steps, contact the Bunn-O-Matic
Technical Service Department at 1-800-637-8606.
• Inspection, testing, and repair of electrical equipment should be performed only by qualified service
personnel.
• Solenoid removal requires interrupting the water supply to the valve. Damage may result if solenoids are
energized for more than ten minutes without a supply of water.
• The use of two wrenches is recommended whenever plumbing fittings are tightened or loosened. This will
help to avoid twists and kinks in the tubing.
• Make certain that all plumbing connections are sealed and electrical connections tight and isolated.
• This brewer is heated at all times unless disconnected from the power source. Keep away from
combustibles.
WARNINGS
• Exercise extreme caution when servicing electrical equipment.
• Disconnect the brewer from the power source when servicing, except when specified.
• Follow recommended service procedures.