Bunn ESJ Coffee Grinder User Manual


  Open as PDF
of 6
 
BUNN Espress
®
ES•J
4
INSTALLATION
TECHNICAL SPECIFICATIONS
Motor Power .....................................................0.5 HP
Power Consumption ......................................5.0 amps
Motor Speed .....................................................1400 rpm
Grinding Capacity ...........................................22-31 pounds/hour
Bean Hopper Capacity ..................................2.6 pounds
Ground Coee Container Capacity ...........0.3 pounds
Weight (Empty) ................................................28 pounds
ELECTRICAL REQUIREMENTS
This grinder has an attached cordset and requires 2-wire, grounded service rated 120 volts ac,
15 amp, single phase, 60 Hz.
INSTALLATION
1. Clear all foreign objects and shipping materials from the en-
trance to the grind chamber and the hopper.
2. Place the hopper on top of the grinder. The indentation in the
hopper neck must align with the screw on the grinder. Tighten
the screw into the hopper.
3. Remove the two llister head screws on the left side of the front
of the grinder.
4. Securely fasten the enclosed tamper to the grinder so that
it extends down past the bottom edge of the ground coee
container.
5. Check the voltage at the electrical outlet for the proper volt-
age.
6. The grinder can now be lled with beans, plugged-in, and put
into service.
 previous next