Bunn G2 Coffee Grinder User Manual


 
17
+
A
C
A
C
SERVICE (cont.)
Removal and Replacement:
1. Disconnect the wires from the rectifier.
2. Remove the #10-32 screw securing the rectifier
to the motor mounting bracket.
3. Remove the rectifier and discard.
4. Install new rectifier on the rear of the motor
mounting bracket and secure with a #10-32
screw.
5. Refer to Fig. 13 and reconnect the wires.
BLK from Motor (+)
BLU to BLU from Motor (AC)
WHI from Main Harness (AC)
RED from Motor (-)
FIG. 13 RECTIFIER TERMINALS
P1381
RECTIFIER - G1MD ONLY
CLE
ANIN
G LEVER
CLEANING LEVER
GROUND
COFFEE