Bunn G9-2T DB Coffee Grinder User Manual


 
5
NUMBER NAME NUMBER NAME
1 Regular 15 Jamaica Blue Mtn
2 Decaf 16 Guatemalan
3 Colombian 17 Light Roast
4 Colombia Supremo 18 Dark Roast
5 Costa Rican 19 Espresso
6 Ethiopian 20 Amaretto
7 Kona 21 Hazelnut
8 Kenya AA 22 French Vanilla
9 Sumatran 23 Irish Creme
10 French Roast 24 Vanilla Nut
11 Italian Roast 25 Caramel
12 Mocha Java 26 Raspberry
13 House Blend 27 Almond
14 Breakfast Blend 28 Dark Mtn Roast
33736 052802
COFFEE CHART
COMMUNICATING WITH COFFEE BREWER
When the grinder is used with its companion brewer, the name of the coffee and the size of the batch ground
is communicated to the brewer through the chip in the funnel handle as it is placed into the brewer. Therefore, it
is necessary to “tell” the grinder the names of the coffees that have been loaded into the hoppers. The names are
chosen from the Coffee Chart shown below. Contact the factory if custom names that are not on the chart are
required.
SELECTING COFFEE NAMES
Entering a coffee name from the chart below:
1. Simultaneously press and hold the
button and any one of the three batch buttons on the side to be
programmed. After 3 seconds all three indicators on the side selected will begin flashing. The display will
show a number from the coffee chart below. This number represents the name of the coffee that is to be
loaded into the hopper.
2. Press and release