Filter
Top Products
6
♦ Press the key when time is set at “0”, and “INF” will appear in the display window. The oven will
then work continuously until you stop it by pressing the START / STOP key.
• TEMPERATURE
♦ To choose the Temperature function, press the SELECT key until the red Temperature indicator
light is lit next to the Temperature icon (thermometer) on the control panel.
♦ To set the temperature, use the or keys. Hold the key down to quickly scroll to desired setting.
♦ The usable operating temperature range is approx. 140°F to 500°F. The default temperature is 356°F.
♦ Always preheat oven cavity before placing food in the oven.
• START / STOP COOKING CYCLE
♦ To start or stop the cooking cycle, press the START / STOP key.
♦ At the end of the cooking cycle, the heating element(s) and fan(s) will stop running and a tone will
sound for 15 seconds. The digits “0.00” will flash for 45 seconds in the display window. The original
temperature remains as entered at the beginning of the cooking cycle and the START / STOP LED
will remain on.
♦ If during these 45 seconds, the operator chooses to set a different time/temperature (using the or ,
and SELECT keys) and begin another cook cycle, the oven will then automatically begin the new
cook cycle.
♦ At the end of the 45 seconds, or if the cooking cycle is interrupted by pressing the START / STOP
key, all the parameters previously set will be erased, unless they have been saved as a “program”
and assigned a number in memory. (See “PROGRAMMED MODE” below.)
• TO VIEW / MODIFY YOUR COOKING PARAMETERS DURING THE COOKING CYCLE
While the oven is in its cooking cycle, it is possible to view the cooking parameters and modify them if
the oven is operating in the manual mode. To view the different parameters (Time, Temperature), simply
press the SELECT key to advance the light.
♦ If you select “Time”, the display shows the remaining time.
♦ If you select “Temperature”, the display will alternate between the set temperature (steady light) and
the actual temperature (flashing light).
PROGRAMMED MODE
• There is room to save up to 70 programs in your oven’s memory for “One Touch Cooking”.
• TO ENTER A PROGRAM INTO MEMORY:
1. Press the P key. The display will read “P01”.
2. Select the number of the program you wish to use by pressing the
or buttons (the program
number will show in the display window)
3. Press the SELECT key.
4. Set the cooking parameters (Time and Temperature) (See MANUAL MODE section above.)
5. Save the program by pressing the