Filter
Top Products
UNPACKING THE COOKER
Unpack the components from inside the grill and oven: Check that the following parts
are present.
Grill pan and grid Top oven/grill shelf heat shield
Baking dish Pan supports (2)
Main oven shelves (3) Enamelled burner caps (5)
Aluminium burner bodies (4) Main oven shelf heat shield
Literature Top oven/grill shelf (1)
LEVELLING
Two rear wheels and two front feet are fitted which can be adjusted up or down to set the
height (900mm - 915mm) and level the cooker.
1. The rear wheels can be raised or lowered from the BACK of the cooker by adjusting
the levelling screws ‘A’ in the plinth.
2. The front feet can be simply screwed in or out to lower or raise the front of the
cooker.
CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully.
Viewed from rear
STABILITY BRACKET
The back of the cooker has a slot for engagement of a stability bracket, which can be
obtained, as an extra, from your cooker supplier.
INSTALLATION INSTRUCTIONS
32
125mm
SLOT FOR
STABILITY
BRACKET
REAR OF
COOKER
STABILITY
BRACKET
POSITION