Filter
Top Products
SPACE FOR FIXING
The cooker can be close fitted below hotplate level. This requires a minimum
distance of 503mm between cupboard units of hotplate height.
When installing next to a tall cupboard, partition or wall, for a minimum distance of
400mm above hotplate level, allow a side clearance of at least 65mm.
The diagram below illustrates the minimum clearance between the cooker and adja-
cent walls, cupboards etc.
The wall behind the cooker, 150mm below the hotplate and 450mm above, and the
width of the cooker, must be a non-combustible material such as ceramic wall tiles.
If the cooker is to be fitted close to a corner on the left hand side, ensure that there is a
clearance of at least 50mm to allow the main oven door to open fully for when remov-
ing oven shelves.
COOKER HOODS
If a cooker hood is to be installed, refer to the cooker hood manufacturers’ instructions
regarding fixing height.
22
INSTALLATION INSTRUCTIONS
65 mm Min
840 mm Min
400 mm Min
503 mm Min
750 mm Min