Filter
Top Products
Push the ON/OFF button to turn the machine on.
PLEASE WAIT
The machine is heating up. Then the display will read:
RINSE UNIT
• Place an empty cup under the coffee-spout (Fig. 8b) and
press the RINSE button (Fig. 2,F).
UNIT RINSING
COFFEE READY You are now ready to make coffee.
• Place 1 or 2 cups under the coffee-spout and press one of the
cup buttons (Fig. 2; C,D,E,G,H). The pre-brew system moistens
the coffee powder, briefly interrupts the flow and then starts
the real brewing process. IMPORTANT: You can stop the flow
of coffee at any time by pressing any of the coffee buttons.
• Adjust the coffee-spout (Fig. 8a,8b) to the size of your cups.
12a. USING GROUND COFFEE
• Open cover (Fig. 1,19).
• Press the GROUND COFFEE button (Fig. 3A; N).
FILL POWDER.
• Fill 1 or 2 level measuring scoops of ground coffee into the
opening for ground coffee (Fig. 1,11).
IMPORTANT: Never use instant coffee.
• Now push one of the coffee buttons to brew your coffee.
NOTE: If the GROUND COFFEE button (Fig. 3A,N) is pressed by
mistake just press one of the cup buttons. The machine will run
a rinse cycle and return to COFFEE READY.
13. PROCESSING HOT WATER
• Place a cup under the height-adjustable coffee spout
(Fig. 8a or 8b) and turn selector switch to the right (Fig. 3,L)
to the water symbol. Hot water will come out of the hot water
spout (Fig.1,14). During this time the display will read:
TEA PORTION. After 5 oz. of hot water (factory setting) the
flow will stop automatically. The display will read: CLOSE TAP.
• Turn the selector switch back to the coffee symbol (Fig. 3,L)
COFFEE READY.
To change the programmed amount of hot
water see chapter 15.5.
14. FROTHING AND STEAMING MILK
The Impressa S9, S8 and S7 can be operated with two different
frothing systems:
a) The Dual Frother-PLUS which is mounted on all machines.
b) The frothXpress-PLUS system which is included with the S9.
For the S7 and S8 order this system with the enclosed order
form or through our website: www.capresso.com.
Recommendation:
• If you froth for only one or two cups at a time and want 100%
control over the frothing/steaming process, the Dual Frother-
PLUS might be the preferred equipment. Use with the
PERMANENT STEAM button (Fig. 3,M).
• If you always want the same amount of milk and milk froth in
your cup or you make three, four, five or more cappuccinos in
a row the frothXpress-PLUS is definitely faster and more
convenient to use. Ideally use the STEAM PORTION button.
Frothing (Cappuccino): Injecting hot steam into the milk to warm
the milk and
create a firm layer of tiny bubbles.
Steaming (Latte): Injecting hot steam to warm the milk without a
frothy layer.
15.