Troubleshooting
IMPORTANT:
Do not operate with a damaged cord, plug, after the appliance malfunctions or has been damaged in any way. You should
contact CDA Customer care for inspection, repair or adjustment.
Problem Solution:
WATER MISSING shows in the display
The water tank is empty and needs to be refilled
ICE FAULT WATER READY shows in the display
at first switch on
Turn the icemaker off with and the main switch on the side, before
switching it on again.
The icemaker emits a continuous beep UV Sterilizer needs replacing - contact CDA Customer Care
The dispensed water has an unpleasant taste Ensure that only water pipes suitable for drinking water are used
ICE FAULT shows in the display
Turn the icemaker off with remove some ice and turn it on again.
We recommend that the unit is not left on permanently.