Filter
Top Products
10
IMPORTANT: Installation must be
carried out according to the manu-
facturer's instructions. Incorrect
installation may cause harm and
damage to people, animals or prop-
erty, for which the manufacturer
accepts no responsibility.
DETAILS
✓ Connection to the electric power sup-
ply must be carried out by a qualified
technician and following the appro-
priate safety regulations;
✓ Before carrying out the connection to
the power supply, the voltage rating
of the appliance (stamped on the
appliance identification plate) must
be checked for correspondence to
the available mains supply voltage,
and the mains electric wiring should
be capable of handling the appli-
ance’s power rating (also indicated
on the identification plate);
✓ If the hob is supplied without plug, fit
a standard plug which is suitable for
the power absorbed by the appliance
and in conformity with the local rules
in force.
✓ The plug must be put into a socket
connected to the earth system in
compliance with safety rules.
✓ This appliance can be connected
directly to the mains, using fixed
wiring via a DOUBLE POLE
SWITCHED FUSED SPUR OUTLET (13
amps. fuse).
✓ As the colours of the wires in the
mains lead for the appliance, may not
correspond with the coloured mark-
ings identifying the terminals in your
spur box, proceed as follows:
✓ The power supply cord must not
touch against any hot surfaces and
must be placed so that its tempera-
ture does not exceed 75°C at any
point along its length.
✓ After having installed the appliance,
the power switch or power plug
must always be in a accessible posi-
tion.
N.B. For connections to the mains
power supply, never use adaptors,
reductions or multiple power
points as these may overheat and
catch fire.
In the event that installation should
require modifications to the mains sup-
ply wiring system, it is recommended
that a qualified technician be called to
carry out substitution.
The technician will also have to verify
that the cross-section of the electric
cables on the power point match the
appliance’s power rating.
If the hob surface is cracked dis-
connect the appliance from the
mains.
1) The wire which is coloured green and
yellow must be connected to the ter-
minal marked E (Earth) or
coloured Green.
2) The wire which is coloured blue must
be connected to the terminal marked
N (Neutral), or coloured Black.
3) The wire which is coloured brown
must be connected to the terminal
marked L (Live), or coloured Red.
Electrical Section