CDA HCG 730 Cooktop User Manual


 
12
GENERAL TIPS
Before cleaning the hob switch it off and wait for it to cool down.
Clean with a cloth, hot water and soap or liquid detergent.
Do not use products which are abrasive, corrosive or chlorine based.
Do not use steel pads.
Do not leave acid or alkaline substances (vinegar, salt, lemon juice, etc.) on the
hob.
Do not use steam jet cleaners because the humidity could infiltrate into
the appliance making it dangerous.
WARNING: When correctly installed, your product meets all safety requirements
laid down for this type of product category. However special care should be taken
around the underneath of the appliance as this area is not designed or intended
to be touched and may contain sharp or rough edges, that may cause injury.
ENAMELLED PARTS
All the enamelled parts must be washed only with a sponge with soapy water or
other non-abrasive products.
Dry preferably with a soft cloth.
If acid substances such as lemon juice, tomato conserve, vinegar etc. are left on
the enamel for a long time they will etch it, making it opaque.
STAINLESS STEEL SURFACES
Stainless steel parts should be rinsed with water and dried with a microfibre or
soft cloth.
For persistent dirt, use specific non-abrasive products available commercially or a
little hot vinegar.
Note: regular use will cause discolouring around the burners, because of the high
flame temperature.
Cleaning and Maintenance