Filter
Top Products
19
Fig. 4
26
Replacing the Halogen Oven Light
WARNING: Ensure the appliance is sw itched o before replacing the lamp to avoid the
possibility of electric shock .
– Let the oven cavity and the heating elements to cool down;
– Switc
To p Right Lamp:
– Remove the protective co ver C (fig. 8);
– Replace the halogen lamp B with a new one suitable for high temperatures
having the following specifications: 230V and same power (ch eck watt
pow er as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Neve r replace the bulb with bare hands;
co ntamination from your fingers can cause premature failure.
Always use a clean cloth or gloves.
– Refit the protective co ver;
Left Lamp:
– Remove the left wire rack by unscrewing the fixing screw s.
– Press down from the top the protective co ver A (fig. 8) and remo ve it by
rotating on the lower side. IMPORTANT : neve r use screwdrivers or other
utensils to remo ve the co ver A. This could damage the enamel of the oven
or the lampholder. Operate only by hands.
– Replace the halogen lamp B with a new one suitable for high temperatures
having the following specifications: 230V and same power (ch eck watt
pow er as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Neve r replace the bulb with bare hands;
co ntamination from your fingers can cause premature failure.
Always use a clean cloth or gloves.
– Refit the protective
co ver A operating in reverse order.
ATTENTION : the notch in the inner edge of the co ve r must be oriented
tow ard the lamp.
– Assemble the left wire rack.
Note: Oven bulb replacement is not co vered by your guarantee.
A
B
B
C
1
2
A
A
Fig. 8
WRONG
CORREC T
Changing the Oven Lamp
Before any maintenance is started involving electrical
parts, the oven must be disconnected from the power
supply.
If the oven has been in use, let the oven cavity and the
heating elements cool down before attempting any
maintenance.
Never replace the bulb with bare hands as
contamination from your fingers can cause premature
failure. Always use a clean cloth or gloves.
Changing the bulb (fig. 3)
Unscrew the protective cover.
Carefully remove the bulb and replace with a new one
suitable for high temperatures with the same specification as
the original bulb.
Refit the protective cover.
Fig. 3
26
Replacing the Halogen Oven Light
WARNING: Ensure the appliance is sw itched o before replacing the lamp to avoid the
possibility of electric shock .
– Let the oven cavity and the heating elements to cool down;
– Switc
To p Right Lamp:
– Remove the protective co ver C (fig. 8);
– Replace the halogen lamp B with a new one suitable for high temperatures
having the following specifications: 230V and same power (ch eck watt
pow er as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Neve r replace the bulb with bare hands;
co ntamination from your fingers can cause premature failure.
Always use a clean cloth or gloves.
– Refit the protective co ver;
Left Lamp:
– Remove the left wire rack by unscrewing the fixing screw s.
– Press down from the top the protective co ver A (fig. 8) and remo ve it by
rotating on the lower side. IMPORTANT : neve r use screwdrivers or other
utensils to remove the co ver A. This could damage the enamel of the oven
or the lampholder. Operate only by hands.
– Replace the halogen lamp B with a new one suitable for high temperatures
having the following specifications: 230V and same power (ch eck watt
pow er as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Neve r replace the bulb with bare hands;
co ntamination from your fingers can cause premature failure.
Always use a clean cloth or gloves.
– Refit the protective
co ver A operating in reverse order.
ATTENTION : the notch in the inner edge of the co ve r must be oriented
tow ard the lamp.
– Assemble the left wire rack.
Note: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
Fig. 8
WRONG
CORREC T
WRONG
CORRECT