CDA SV310SS Oven User Manual


 
21
Electricity supply to your oven
The manufacturer cannot be held responsible for any issues arising from incorrect installation.Warning!
This appliance must be earthed. The manufacturer declines all responsibility for any issues caused by
failure to observe this requirement.
THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON, USING FIXED WIRING
VIA A DOUBLE POLE SWITCHED FUSE SPUR OUTLET AND PROTECTED BY A SUITABLE FUSE (16A MINIMUM).
We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who
will comply with the I.E.E. and local regulations.
The wires in the mains lead of this appliance are coloured in accordance with the following code:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
As the colours of the wires in the mains lead for the appliance may not correspond with the coloured markings identifying
the terminals connecting to the socket, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal marked E (Earth) or coloured green.
The wire which is coloured blue must be connected to the terminal marked N (Neutral), or coloured black.
The wire which is coloured brown must be connected to the terminal marked L (Live), or coloured red.
Note: Use a suitable fuse (16A minimum).
Assembly and electrical connection should be carried out by specialised personnel.
When installing this product we recommend you seek the help of another individual.
Please note:
The mains cable must only be replaced by a qualied electrician or service engineer and must be of equivalent or
better rating (i.e. 1.5 mm² HO5RR-F,).
The marking of the current rating of the fuse or circuit breaker protecting this appliance should be marked on the
socket outlet.