Cecilware EL-25 Fryer User Manual


 
4
Cleaning, Care and Maintenance
Switch off the power and disconnect from the power source.
The fryer should be cleaned after each day’s operation, however it may require to be cleaned more
often, depending on the volume of production.
The fryer must be left to cool before cleaning. Empty oil from the pan. If the oil is to be reused, it is
recommended that it be filtered with the Cecilware Frysaver® Filtration System to ensure longer yield
and a better quality in the cooked product. Note: the 15 lb. fryer is fitted with a drain valve.
Once the oil has been emptied from the fryer, the control box can be tilted back to remove the pan from
the body. The pan can be washed using warm soapy water.
The main body can also be washed in warm soapy water, but be sure to unclip the control box and
element first. The control box cannot be immersed in water; however, the control box can be wiped
down with a damp cloth. Warm soapy water is recommended for cleaning. Prolonged use of cleaning
agents can damage stainless steel.
Safety
*The Cecilware fryer does not contain any user-friendly parts. A Cecilware Recommended Qualified
Service Technician should carry out repairs if necessary. Do not remove any components or service
panels on this product.
*Switch off power to and disconnect from the main power source while cleaning.
Ensure oil levels are maintained above the minimum indicated level in the fryer. Failing to maintain the
required level may result in fire.
Ensure oil is changed regularly. Used oil breaks down after use and can result in fire, as its flash point is
reduced, and it is more prone to surge boiling.
Note: products containing humidity/moisture will cause surge boiling when placed in hot oil.
The basin should remain uncovered during frying.
Hot oil causes serious damage to skin. Avoid skin contact with hot oil.
Do not immerse unit in water or use water jets to clean.
If the power cord is damaged, it must be replaced by a Cecilware Service Agent or Recommended
Qualified Service Technician in order to avoid a hazard.
Important Note:
Caution:
All double pot Fryers has two power supply cords. Each Fryer pot is independently controlled. Connect
each plug to a receptacle that is connected to an individual branch circuit. Unplug both cords before
installing, cleaning, moving, or servicing this appliance.