Filter
Top Products
3
Operation
Your Panini Sandwich Grill should be turned on prior to usage to allow the cooking surface to warm up;
5 minutes is sufficient for preheating.
To get efficient use out of this unit while in intermittent use, it is recommended that the grill plates
remain closed and that the thermostat is turned down, when not cooking. This will assist in reducing
power consumption and also allow for quicker heat response when needed.
Cecilware recommends that the cooking surface be lightly greased before each use.
A temperature setting of between 390º F and 430º F will be sufficient for general cooking. This may
vary for particular food types, individual needs, or experience.
Simply place the food product on the bottom grilling surface, lower the top plate down, and cook to your
needs.
Cleaning, Care and Maintenance
Switch the power off and disconnect from the power source.
*The Panini Sandwich Grill should be cleaned regularly throughout use, and thoroughly
cleaned after each meal preparation. Regular cleaning will result in easier cleaning. Correct
preparation of the cooking surface when first used, will assist in keeping the plates clean.
*For best results, clean the plate while still warm using warm soapy water. A nylon cleaning cloth can
be used, but it is recommended that scrapers such as steel wool etc., be avoided, as they will damage
the plates. Do not use cold water on warm plates; a bucking effect may occur.
*When scrubbing the plates, do not clean too thoroughly. If you do, you may have to prepare the
cooking surface again before use.
*Remove drip tray from unit and discard waste. Clean in hot soapy water.
*The remainder of the griddle can be cleaned with a damp cloth using hot, soapy water.
*Warm soapy water is recommended for cleaning; strong cleaning agents may damage stainless steel.
Safety
A Cecilware Recommended Qualified Service Technician should carry out repairs if necessary. Do not
remove any components or service panels on this product.
*During operation, the Panini Sandwich Grill reaches high temperatures on the cooking surface, which
in turn heats the stainless steel surfaces. To eliminate accidents, use the black handles when in contact
with the grill.
*Switch off power to and disconnect from the power supply when cleaning.
*Allow the Contact Grill to cool down after use before dismantling for cleaning; the unit will still be too
hot to handle immediately after use.
*This unit has been equipped with a thermal cut-off safety device to avoid over heating.
*Do not immerse unit in water or use hose to clean.
*If the power cord is damaged, it must be replaced by a Cecilware Recommended Qualified Service
Technician in order to avoid a hazard.