Filter
Top Products
ASSEMBLY
2
1
Qty: 12
#10-24x1/2" Screw
Leg Assembly
with Rating Label
• Remove top cover, cooking basket and cooking pot.
• Turn appliance upside down.
• Attach legs to body using three #10-24 x 1/2" screws and three #10-24 Keps nuts for each leg. Insert screw through
appliance body from outside, then through matching hole in leg and apply the #10-24 Keps nut. Assure leg with rating
label is attached behind burner tube outlet as pictured.
Burner
#10-24x1/2”
Screw
#10-24x3/8”
Screw located at
each end
of the grease rails.
Qty: 12
#10-24 Keps Nut
#10-24
Keps Nuts
Tools required for assembly:
Phillips Screwdriver (Not Supplied); Small Adjustable Wrench (Not Supplied)
13
• While the appliance is upside down, take a moment to ensure the grease tray slides into the grease tray rails smoothly. If
not, loosen the screws shown below and adjust the grease tray rails as necessary. Once adjustments are complete - tighten
the screws.
Slide the Grease Tray into the
Grease Tray Rails to ensure
smooth operation.
Adjust the grease rails as
necessary to ensure smooth
operation, then tighten screws.
Grease Tray Rail
Grease Tray Rail