Filter
Top Products
3
4
This step requires two people
to lift and position grill head
onto cart. Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging outside
the cart. Grill head must face open
side of cart.
Place lower back panel between side panels at rear of bottom shelf. Secure lower back panel to side panels using
four1/4-20x1/2” screws, 7mm lock washers, and 7mm flat washers.
14
Regulator hose
Grill head
Qty.4
Qty.4
7mm lock washer
7mm flat washer
Lower back panel
1/4-20x1/2” screw
7mm lock washer
7mm flat washer
1/4-20x1/2” screw
Qty.4