Filter
Top Products
COLORado Range IP QRG
Page 4 of 8
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Mounting
Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
Product
Mounting
Diagram
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<SET>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Programming
For details on how to program this product,
p
lease refer to the product’s
user manual.
Password
After being prompted to enter the password, press:
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
Overhead Mounting
Floor Mounting
C Clamps
(not included)
Safety cable
(included)
COLORado Range IP QRG
Page 5 of 8
Menu Options
Main Level 2
nd
Level 3
rd
Level Description
STAT
RED
000~255
(0~100%)
User can combine Red, Green, Blue, White,
and Amber to generate a custom color.
GREEN
BLUE
WHITE
AMBER
STRB 00~20 (0~20 Hz)
Select a strobe frequency
AUTO
AUTO
1~10
Choose from 10 automatic programs
CUSTOM
Choose from 10 customizable programs
ADDR
001~512
N/A Sets the DMX starting address
RUN
DMX/SLAV
N/A Selects the DMX or SLAVE mode
PERS
TOUR
N/A
16-channel
A
RC 1
3-channel
A
R1.D
4-channel
A
RC.3
5-channel
A
R3.D
6-channel
A
R3.S
7-channel
HSV
3-channel
BLOCK
10-channel
SET
UPLD PSWD SEND END
Uploads custom programs
REST PSWD RST END
Resets the fixture to the factory settings
DIM
OFF
Faders act linearly
DIM1~4
DIM1 (fastest)~DIM4 (slowest)
COLOR
OFF
No color compensation
RGBW White is defined by CAL2 > RGB.W
UC
Color compensation to match older fixtures
EDIT
PR
(1~10)
SC
(01~30)
RED
000~255
User can combine Red, Green, Blue, White,
and Amber to generate a custom color.
GREEN
BLUE
WHITE
AMBER
STRB 00~20
Selects the strobe frequency (0~20 Hz)
TIME
000~255
Defines the step duration (0~100%)
FADE
Defines the fade duration (0~100%)
CAL1
WH (1~11)
RED
000~255
User can combine Red, Green, Blue, White,
and Amber to generate whites with various
temperatures (TOUR > Channel 12).
GREEN
BLUE
WHITE
AMBER
CAL2
RGB.W
RED
000~255
User can combine Red, Green, and Blue to
generate a balanced white (SET > COLOR
>RGBW))
GREEN
BLUE
WDMX
ACTI
ON/OFF
Activates W-DMX connection
REST
Resets W-DMX connection
KEY
ON/OFF
N/A Turns the password on or off