Filter
Top Products
Getting Started
2.2.4. Installers Checklist
Dishmachine checked for concealed damage
Hot water supply is 140° F (60 C)
Incoming water supply line is ½” minimum
Supply circuit breaker for machine is properly sized (20 amp)
Service voltage and phase type are correct to machine data plate
Drain hose is installed with adequate air gap
Dishmachine is properly grounded
Dishmachine is properly leveled
Machine circuit breaker is labeled “DISHWASHER”
Machine has been connected with correctly sized wire (12 gauge
minimum)
MODEL L-1X & L-1X16 Installation & Operations Manual Rev. 1.14 Page7