Creda R420E Oven User Manual


 
1. “CREDACLEAN” OVEN LINERS (E420E)
(a) How "Credaclean" works.
The surfaces of the "Credaclean" oven liners are treated with a
special vitreous enamel which absorbs cooking soils.
At temperatures of 220
˚
C (425
˚
F) or above, the special surface
enables these soils to be slowly destroyed.
The higher the temperature the more effective it is.
(b) Cleaning.
In most cases normal cooking operations at 220
˚
C (425
˚
F) will
permit this cleaning operation to proceed during cooking.
However if higher cooking temperatures are not used regularly,
it may be necessary, in order to prevent heavy soiling, to run
the ovens without shelves or meat pan, at a maximum setting
for a couple of hours.
It should not normally be necessary to clean the "Credaclean"
panels with water. If the user feels it is desirable to do so, wipe
them over with a clean, soapy cloth, followed by a wipe with a
clean damp cloth.
2. VITREOUS ENAMEL OVEN LINERS (R420E)
Cleaning.
These can be cleaned by wiping them over with a clean, soapy
cloth, followed by a wipe with a clean damp cloth.
For more stubborn stains on the side liners use a well soaped,
fine steel wool soap pad.
Care and Cleaning
28
Warning: Before cleaning, please ensure that the electricity supply to the appliance is switched off
and the appliance is fully cold.
DO NOT use biological washing powder, harsh abrasives or chemical
oven cleaners of any kind as this could damage the “Credaclean” oven
liners.
TOP OVEN SIDE LINERS
MAIN OVEN SIDE LINERS
AND REAR PANEL