Creda S840G Cooktop User Manual


 
5
How To Use Your Hob
Know your Hob
The position of the corresponding gas burner is indicated on
each control knob.
The burners differ in size and power. Choose the most
appropriate one for the diameter of the cookware being used.
The burner can be regulated with the corresonding control
knob by using one of the following settings:
Off
High
Low
To light a burner, simply press the corresponding knob all
the way in and then turn it in the counter-clockwise direction
to the "High" setting, keeping it pressed in until the burner
lights.
This model is fitted with a safety device (F), the knob
must be pressed in for about 6 seconds until the device that
keeps the flame lighted warms up.
Caution: If the burner accidently goes out, turn off the gas
with the control knob and try to light it again after waiting at
least 1 minute.
To turn off a burner, turn the knob in the clockwise direction
until it stops (it should be on the “•” setting).
A. Gas Burners
B. Support Grid for Cookware
C. Control Knobs for Gas Burners
D. Ignitor for Gas Burners (only on certain models)
E. Ignition Button for Gas Burners (only on certain
models)
F. Safety Device (only on certain models) - Activates if
the flame accidentally goes out (spills, drafts, etc.),
interrupting the delivery of gas to the burner.
C
B
A
D
F