Cres Cor CO151HWUA5B Convection Oven User Manual


 
Ovens Humidity with
Microprocessor Controls
FL-2267
Rev. 8 (1/05) Page 3 of 13
5925 Heisley Road Mentor, OH 44060-1833
877/CRES COR (273-7267) 440/350-1100
Fax: 440/350-7267 www.crescor.com
INSTALLATION INSTRUCTIONS
VENTING YOUR OVEN:
1. The purpose of ventilating hoods is to direct and
capture smoke, grease-laden vapors, heat, odors, or
fumes.
2. Low temperature equipment (maximum temperature
250°F/121°C) does not produce heat, odors, fumes,
grease-laden vapors or smoke and is not required to
be vented.
3. Most jurisdictions consider our low-temperature
ovens (maximum temperature is 350°F/177°C) as
low-heat appliances not requiring vent hoods.
4. Installation must conform with local codes. The
authority having jurisdiction of enforcement of the
codes will have the responsibility for making
interpretations of the rules.
UNIT SPECIFICATIONS:
All units use three (3) elements (2670 watts each).
All units are rated 8200 watts. Water units have one (1) immersion element (1850 watts).
ELECTRICAL SPECS
(AC SERVICE)
ELEC. LOAD POWER SUPPLY REQUIREMENT
CONVECTION OVENS
CMP MODEL NOS.
Volts Ph Hz. Amps Volts Amps Ph Wire Volts NEMA
CO151FWUA12B2081Q1
CO151FWUA12B2401Q1
208
240
1
1
60
60
39
34
208
240
50
50
1
1
3
3
208
240
6-50P
6-50P
CO151FWUA12B2083Q1
CO151FWUA12B2403Q1
208
240
3
3
60
60
23
20
208
240
30
30
3
3
4
4
208
240
L15-30P
L15-30P
RETHERM OVENS
RO151FWUA18B2081Q1
RO151FWUA18B2401Q1
208
240
1
1
60
60
39
34
208
240
50
50
1
1
3
3
208
240
6-50P
6-50P
RO151FWUA18B2083Q1
RO151FWUA18B2403Q1
208
240
3
3
60
60
23
20
208
240
30
30
3
3
4
4
208
240
L15-30P
L15-30P
RO151FW1332B2081Q1
RO151FW1332B2401Q1
208
240
1
1
60
60
39
34
208
240
50
50
1
1
3
3
208
240
6-50P
6-50P
RO151FW1332B2083Q1
RO151FW1332B2403Q1
208
240
3
3
60
60
23
20
208
240
30
30
3
3
4
4
208
240
L15-30P
L15-30P
HALF-SIZE OVENS ARE RATED AT 4950 WATTS (THREE [3] HEATERS AT 1470 WATTS EACH)
CO151HWUA6B2081Q1
CO151HWUA6B2401Q1
208
240
1
1
60
60
24
21
208
240
30
30
1
1
3
3
208
240
6-30P
6-30P
CO151HWUA6B2083Q1
CO151HWUA6B2403Q1
208
240
3
3
60
60
15
13
208
240
20
20
3
3
4
4
208
240
L15-20P
L15-20P
CO151XWUA5B2081Q1
CO151XWUA5B2401Q1
208
240
1
1
60
60
24
21
208
240
30
30
1
1
3
3
208
240
6-30P
6-30P
CO151XWUA5B2083Q1
CO151XWUA5B2403Q1
208
240
3
3
60
60
15
13
208
240
20
20
3
3
4
4
208
240
L15-20P
L15-20P
All models are designed for AC Service. Model numbers may have the letters: L, M, 2M, or S.
HOW TO INSTALL CABINETS:
1. Remove all packing material from inside and
outside of cabinet.
2. Position cabinet on level floor; install the
cabinet interior (pan slides) if not already
installed.
3. Plug power cord into proper wall receptacle.
4. Fill water pan with three (3) gallons of HOT
water (see CAUTION
).
LOW WATER LIGHT:
When water needs to be added to the pan, the Low
Water Light will stay on until the pan is refilled.
Use of treated water
is recommended for
proper operation and
to maintain warranty. It will reduce scaling.