Filter
Top Products
11
B Programming
Setting the Clock
When the Grind & Brew Plus is plugged in, “12:00” will appear until you set the time.
Entering “Time Set” mode:
To set the time, press and hold either the “Hours” or “Minutes” button until the clock begins to ash
(approx. 2 seconds). This signals that you have entered the “Time set” mode. The desired time can be
set by pressing the “Hours” and “Minutes” buttons to scroll forward through the digits. The buttons
can be held down to scroll through the digits, or pressed and released lightly to advance one digit at
a time.
N.B. Be careful to make sure that the “PM” indicator is on if a “PM” time is desired.
Exiting “Time Set” mode:
There are 2 ways to exit the “Time Set Mode”:
ß Press any button besides the “Hours” or “Minutes” button. This will exit the “Time Set” mode and
activated the selected function.
ß Do not press any of the buttons on the control panel. If neither “Hours” nor “Minutes” button is
pressed for a period of 5 seconds, the “Time Set” mode will be exited automatically.