Filter
Top Products
13
C Inserting the Charcoal water filter
N.B. Your appliance is supplied with two charcoal water lters.
It is strongly recommended that the water lter is replaced after 90 days or 90 uses; more often if you
have hard water. Failure to do so can lead to a build-up of lime scale and affect the performance of
your appliance. Replacement lters can be purchased directly from the manufacturer, (see “UK After
Sales Service” section for further details).
ß Remove the lter from its packaging and soak in cold tap water for 15 minutes.
ß To remove the water lter holder, simply lift it out from its opening on the inner wall of the
reservoir.
ß Hold stem in one hand. With your other hand, gently press the compartment door down and pull
outwards to ip open.
ß Place the lter in the holder and close the compartment cover; you will hear a snap indicating lter
is in place.
N.B. Caution must be used when inserting the charcoal lter. Improper placement in the holder can
cause tearing of the lter skin.
ß Hold the lter under cold running tap water for 10 seconds to ush. Hold the water lter holder hori-
zontally, directly under the water stream so that the water ows through the lter compartment.
ß Allow the lter to drain completely.
ß Replace the water lter holder into its opening on the inner wall of the reservoir, pushing it all the way
down to the base of the unit.