Filter
Top Products
5
OPERATING INSTRUCTIONS
Frothing Milk
1. Remove the cover and insert the milk
frothing whisk in the recess in the bottom
of the housing.
2. Fill the tank with the desired amount of milk.
Note: Never fill milk over the MAX fill line.
Frothed milk expands and it will overflow
the tank if the level is too high.
3. Put the cover back on the tank.
4.
Start frothing by pressing the corresponding
Milk Button (top position button for HOT and bottom
position button for COLD). The LED light will be
illuminated during operation.
Note: Preparation stops automatically after 2 minutes,
depending on the amount of milk.
5. Open the cover after frothing is complete.
6.
Pour or ladle the milk froth into a cup or
glass.
7. After using the unit, clean it as described
in the Cleaning and Maintenance section,
next page.
Note: Wait for tank to cool before cleaning.
Warming Milk
1. Remove the cover and insert the milk
warming stirrer.
2. Fill the tank with the desired amount of
milk.
Note: Never fill milk over the MAX fill line.
3. Put the cover back on the tank.
4. Start warming milk by pressing the
corresponding Hot Milk Button (top
position). The LED light will be illuminated
during operation.
Note: Preparation stops automatically after 2 minutes,
depending on the amount of milk.
5. Open the cover after warming is complete.
6. Pour the warmed milk into a cup or glass.
7. After using the unit, clean it as described in the
Cleaning and Maintenance section, next page.
Note: Wait for tank to cool before cleaning.