Cuisinart SBC1000 Food Processor User Manual


 
2
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
SPECIAL CORD SET
INSTRUCTIONS
NOTICE
For your protection, this unit is equipped with a
3-conductor cord set that has a molded 3-prong
grounding-type plug, and should be used in combina-
tion with a properly connected grounding-type outlet
as shown in Figure A.
1. A short power supply cord (or detachable power sup-
ply cord) is to be provided to reduce risks resulting from
becoming entangled in or tripping over a longer cord.
2. Longer detachable power supply cords or extension
cords are available and may be used if care is exer-
cised in their use.
3. If a long detachable power supply cord or extension
cord is used:
a) The marked electrical rating of the detachable
power supply cord or extension cord should be
at least as great as the electrical rating of the
appliance;
b) If the appliance is of the grounded type, the exten-
sion cord should be a grounded type 3-wire cord;
and
c) The longer cord should be arranged so that it will
not drape over the counter top or table top where
it can be pulled on by children or tripped over.
NOTE: Do not remove the grounding prong.
CAUTION: Before using an adapter, it must be
determined that the outlet cover plate screw is
properly grounded. If in doubt,
consult a licensed electrician.
Never use an adapter unless
you are sure it is properly
grounded.
Note: Use of an adapter is not
permitted in Canada.
UNPACKING INSTRUCTIONS
1. Place the gift box containing your Cuisinart
®
blender on a flat, sturdy surface before unpacking.
2. Remove instruction booklet and other printed
materials from the top of corrugated insert.
Next remove the top corrugated insert.
3. Carefully lift blender base from box and set aside.
4. Carefully remove lower corrugated insert
containing the blender jar assembly. Be careful not
to tip the jar when moving.
To assemble the blender, follow the Assembly
Instructions on page 4 in this instruction booklet.
Replace all corrugated inserts in the box and save the
box for repackaging.
Before using for the first time: Wash all parts
according to the Cleaning and Maintenance section on
page 6 of this booklet to remove any dust or residue.
TABLE OF CONTENTS
Important Safeguards .........................1
Unpacking Instructions ........................2
Features and Benefits .........................3
Assembly ...................................4
Helpful Reminders ............................4
Getting to Know Your Control Panel .............5
Cooking and Blending .........................6
Blending Cold Ingredients ......................6
Cleaning and Maintenance .....................6
DOs and DON’Ts ............................7
Warranty Information ..........................8
Figure A