Cuisinart TAN-4C Toaster User Manual


 
5
To stop cycle
When the defrost cycle is complete, the toaster will raise the bread. If
you wish to stop the cycle before it is finished, simply press the Cancel
button to interrupt. After use, unplug the toaster from the electrical
outlet.
Reheat Function
The reheat feature allows you to reheat bread without browning or
toasting.
1. Insert slice(s) of bread.
Be sure that multiple slices do not overlap and the carriage is in the
up position.
2. Select the Reheat function on the Control Dial.
3. Press the carriage control lever until it locks into position.
To stop cycle
When the reheat cycle is complete, the toaster will raise the bread. If
you wish to stop the cycle before it is finished, simply press the cancel
button to interrupt.
After use, unplug the toaster from the electrical outlet.
Bagel Function
The bagel feature adds extra time to the toasting cycle to allow for
thicker breads.
1. Insert slice(s) of bread.
Be sure that multiple slices do not overlap and the carriage is in the
up position.
2. Select the Bagel function on the Control Dial.
3. Press the carriage control lever until it locks into position.
4. When the Bagel cycle is complete, the toaster will raise
the bread. If you wish to stop the cycle before it is finished, simply
press the Cancel button to interrupt.
REMEMBER: Set the function control dial back to the Toast position
after using one of the specialty functions (Bagel, Defrost or Reheat)
upon completion of the cycle.
CLEANING AND MAINTENANCE
Always allow the toaster to cool completely before cleaning.
1. Always unplug the toaster from the electrical outlet.
2. Do not use abrasive cleansers. Simply wipe the exterior with a
clean damp cloth and dry thoroughly. Apply any cleansing agent to
a cloth, not to the toaster, before cleaning.
3. To remove crumbs, slide out the crumb tray and discard crumbs.
Wipe clean and replace. Never operate the toaster without the
crumb tray in place.
4. To remove any pieces of bread remaining in the toaster, turn the
toaster upside down and gently shake. Never insert any hard or
sharp instruments into the slot, as this could damage the toaster
and cause a safety hazard.
5. Never wrap the cord around the outside of the toaster. Use the
cord storage cleats on the underside of the toaster.