Filter
Top Products
4
POPPING INSTRUCTIONS
1. Follow assembly procedure.
2. Make sure the popcorn maker is unplugged before
you do any of the following.
3. Before using the unit, please check carefully to be sure volt-
age (120V – 60 Hz ) is suitable to your home.
4. Clean the internal surface of the kettle with warm sudsy water,
rinse well and dry with a clean cloth. Wipe down inner and
outer housing with damp cloth.
5. Main unit has a 2-function switch as follows:
– POP to turn heater, stirrer and light on
FIGURE 2
Hook the kettle onto the
hanger of the main unit.
FIGURE 4
Finally, insert the internal
kettle plug into the socket
on the inner top of the
popcorn housing.
FIGURE 3
Insert tray.
FIGURE 1
Place door on hinges.