Filter
Top Products
7
2. Begin to slide the rack in, lifting the front safety
clips over the front of the oven rack supports.
3. Push the rack all the way in.
4. Grasp the rack in the center of the front and
pull. The rack should come forward while the
guides remain in place.
To remove an oven rack:
• Grasp the rack with both hands and pull it gently
straight out toward you until it stops.
• Lift up until the front safety clips just clear the
front of the rack supports on the oven. Continue
to pull out. Moving the end of the rack back and
forth slightly, left to right, as you pull, will make
it easier to remove.
Setting Up Your Range
Installing the Oven Racks
WARNING
The oven racks become hot when the oven is in use.
Your oven comes with Dacor’s deluxe GlideRack
oven racks. You can pull then out further than other
types of oven racks and still support heavy pots and
pans full of food. They are great for heavier foods
and the optional Dacor baking stone.
To install an oven rack:
1. Align both sets of safety clips (right and left) on
the back of the rack guides with the oven rack
supports as shown below. NOTE: The diagram
below shows installation with the rack guides
extended but, the rack may be installed with
or without the guides extended, whichever is
easier.
GlideRack Oven Rack Installation
Front of rack
Lift front safety clips
over rack supports
Rack
support
Slide oven rack
supports between
back safety clips
Back of
guide
Rack guides