Filter
Top Products
19
Parts and Accessories
Before You Call for Service
Description Dacor Part Number
Dacor Stainless Steel Cleaner A302
Halogen light bulb (12 Vac, 20 Watt) 100429
Igniter cleaning brush 82015
Wok ring AWR4
Cooktop griddle AG12
Cooktop grill AGRG12
Standard broil pan and broil pan grill AER30BP
1 3/4” (low profile) backguard kit (standard on model ER36GI) AER36GLBG
6” backguard kit (not for use with ER36GI with self-rimming trim installed) AER36GBG6
9” backguard kit (not for use with ER36GI with self-rimming trim installed) AER36GBG9
24” backguard kit (not for use with ER36GI with self-rimming trim installed) AER36GBG24
Replacement standard oven rack 106420
GlideRack oven rack AER36GGR
Large capacity roast/broil pan with “V” shaped rack AORPVR
Pizza baking stone ABS20
Cookie sheets (3 per carton) ACS363
Trim kit, black chrome AERTK367BC
Trim kit, brass AERTK367BR
Trim kit, copper AERTK367CP
12” grate (2 used per unit) 701196
10” grate (1 used per unit) 700037
Lens pry stick 62974
To order parts and accessories, contact your Dacor dealer or visit www.everythingdacor.com.
Problem May Be Caused By What to Do
Oven will not heat when
turned on.
No power to range. See Nothing Works on facing page.
Gas is turned off. Make sure the gas supply valve is in the
“ON” position.
Gas supply interrupted. Contact gas company.
Oven light will not work. Light bulb is burned out. See Care and Cleaning section.
Oven ON indicator light
goes on and off repeatedly.
Normal operation. The oven ON indicator light illuminates
when the oven is on. The oven burner
control system turns the oven off and on
to maintain the temperature set by the
oven control knob.
Foods over-cook. Incorrect cooking time, temp. Adjust time, temperature or rack position.
Foods under-cook. Incorrect cooking time, temp. Adjust time, temperature or rack position.
Condensation on oven door
window
Cold weather. During cold weather it is normal for con-
densation to appear on the oven window
during the first 10 minutes of operation.
Strange odor when oven is
on.
Residue in oven. During manufacturing, certain residues
can be left on oven surfaces. Oven needs
to be “burned in,” see page 7.