Filter
Top Products
10
BEFORE OPERATING
Before operating your new Microwave in a Drawer make sure
you read and understand this operation manual completely.
• Before the Microwave in a Drawer can be used, follow
these steps:
1 Plug in the Microwave in a Drawer.
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
will appear.
2 Touch the STOP/CLEAR pad.
:
will appear.
3 Set clock.
TO SET THE CLOCK
1 Touch TIMER/CLOCK pad and number 2.
2 Touch number pads for correct time of day and touch
TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time,
ERROR
will appear in the display. Touch the
STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your Microwave in a
Drawer should be interrupted, the display will intermittently
show
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
after the power is reinstated. If
this occurs during cooking, the program will be erased. The
time of day will also be erased. Simply touch STOP/CLEAR
pad and reset the clock for the correct time of day.
Note:
• The Microwave in a Drawer can be programmed with the
drawer open except for START/EASY MINUTE.
TIMER
1 Touch TIMER/CLOCK pad and number 1.
2 Enter time.
3 Touch TIMER/CLOCK pad again.
To cancel timer, touch STOP/CLEAR.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1 Erase if you make a mistake during programming.
2 Cancel timer.
3 Stop the Microwave in a Drawer temporarily during timed
cooking.
4 Return the time of day to the display.
5 Cancel a program during cooking, touch twice for timed
cooking.
OPEN OR CLOSE DRAWER
Always press the OPEN or CLOSE pad on the control panel
to open or close the Drawer.
Do not push or pull the Drawer by hand, except in case
of emergency, such as a power failure. If necessary, push
or pull slowly.