Filter
Top Products
15
12. To remove Rear heater assembly parts.
REF.NO PART CODE PART NAME DESCRIPTION
Q’ T
Y
REMARK
1 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 1
2 3511407300 COVER MOTOR *B SBHG T0.6 1
3 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 2
4 3511407400 COVER *B SBHG T0.6 1
5 3512766900 HARNESS CONVECTION-B KOC-1B0K0S 1
6 3512803800 HEATER MIRACLON 115V 550W 270MM 2
7 3511407700 COVER HEATER *B SA1D T0.5 1
8 7113400814 SCREW TAPPING T1 BIN 4X8 MFNI 3
9 7400104011 WASHER PLAIN PW-1-4 MFNI 1
10 3511800700 FAN CONVECTION SA1D T0.5 1
11 7S627W50X1 NUT HEX NUT FLANGE M5X0.8P MFZN 1
12 3512766800 HARNESS CONVECTION-A KOC-1B0K0S 1
13 7601400811 SCREW MACHINE PAN 4X8 PW MFZN 2
14 3513302900 INSULATOR HEATER *B SA1D T0.5 1
15 7113400814 SCREW TAPPING T1 BIN 4X8 MFNI 4
16 3963514300 MOTOR SHADED POLE 230V 50Hz MW10CA-T02 1
17 3511800800 FAN PP GF20 1
18 7402704600 RING-C CR-5 SK5 1
(1) Remove a screw and then pull out Cover motor *b .
(2) Remove two screws and thenpull out Cover *b .
(3) Pull out the Harness convection-b .
(4) Remove four screws and then pull out the Rear heater assembly.
(5) Remove a Nut and then pull out the Fan convection and Washer plain .
(6) Remove three screws and then separate the Cover heater *b and the Insulator heater *b .
(7) Pull out two Heaters from the the Insulator heater *b .
(8) Remove two screws and then separate the Insulator heater *b and Motor shaded pole
(9) Remove the Ring-c and then pull out the Fan from Motor shaft.
(10) Reverse the above steps for reassembly.
1
2
18
17
16
15
14
13
12
11 10
9
8 7 6
5
3
4
1
3
5
15
11
2
4
10
9
8
7
14
16
14
17
14
6
13
18
✔ Caution:
In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the
latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)