Filter
Top Products
6
Plug power supply cord into 230~240V AC 50Hz
power outlet.
After placing the food in a suitable container,
open the oven door and put it on the glass tray.
The glass tray and roller guide must always be
in place during cooking.
Close the door. Make sure that it is firmly closed.
When the oven door is closed, the light turns off.
The oven door can be opened at any time during
operation by pulling the door. The oven will
automatically shut off. To restart the oven, close
the door and then touch the START pad.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CLEAR pad is touched during
the oven operation, the oven stops cooking and
all information retained. To erase all
information(except the present time), touch the
STOP/CLEAR pad once more. If the oven door is
opened during the oven operation, all information
is retained.
If the START pad is touched and the oven does
not operate, check the area between the door and
door seal for obstructions and make sure the door
is closed securely. The oven will not start cooking
until the door is completely closed or the program
has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1
2
3
4
5
6
7
8
9
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
•
The power-level is set by touching the Power pad. The chart shows the display, the power level
and the percentage of power.
Touch Power Pad Power Level (Display) Approximate Percentage of Power
once P-HI 100%
twice P-90 90%
3 times P-80 80%
4 times P-70 70%
5 times P-60 60%
6 times P-50 50%
7 times P-40 40%
8 times P-30 30%
9 times P-20 20%
10 times P-10 10%
11 times P-00 0%