Daewoo MCM980A Microwave Oven User Manual


 
15
WEIGHT DEFROSTING AND COOKING IN TWO STAGES (CONTINUED)
6. Touch pad.
7. Touch
pads for the power level you want in
the second stage.
8. Touch the number pads for the
cooking time you want in the second
stage.
9. Touch pad.
When you touch START pad, the WEIGHT DEFROST, STAGE1 and STAGE2 indicators come on to
confirm the power levels selected. The WEIGHT DEFROST indicator starts blinking to show you that the
oven is in WEIGHT DEFROST mode. The display counts down the time remaining in WEIGHT
DEFROST mode. When the oven beeps, turn over, break a part and redistribute at a beep. At the end of
WEIGHT DEFROST mode, the oven will beep and start stage one. The WEIGHT DEFROST indicator
goes off and the STAGE 1 indicator starts blinking. The display counts down the time remaining in stage
one. At the end of stage one, the oven will beep and start stage two. The STAGE1 indicator goes off and
the STAGE2 indicator starts blinking. The display counts down the time remaining in stage two when
stage two ends, you will hear 3 beeps.
AUTO START
Auto start can be programmed for up to two cooking stages.
Auto start can not be programmed for auto defrost.
1. Program the desired power level and cooking time for food to be cooked.
2. Touch pad.
3. Enter the desired start time by
pressing the number.
4. Touch pad.
When you touch START pad, the present time appears in the display and the cooking program indicators
come on. The AUTO START indicator and the colon start blinking. When the selected start time arrive, the
oven begins operating and the oven light turns on. The AUTO START indicator goes off and the next stage
indicator begins to blink. When the cooking is completed you will hear 3 beeps. The oven turns off and the
present time appears in the display.
The STAGE2 indicator lights and "P-" is displayed.
The display will show what you touched.
The display will show the numbers you pressed in the order
you touched.
The AUTO START indicator lights and ":0" is displayed.
The display will show the numbers you press pads in the order
you touched.
NOTE: AUTO START can be used for time cooking, if the clock is set. If the oven door is opened after
programming AUTO START, it is necessary to touch the START pad for the time of day to
appear in the readout so that the oven will automatically begin programmed cooking at the
chosen AUTO START time. Before setting, check to make sure the clock is showing the correct
time of day.
Power
1
4
7
2
5
8
0
3
6
9
Start
Start
Clock/A.Start