Filter
Top Products
NORMAL WASH (ECONO MODE)
Water Temperature: (Household Temperature)
Program: 2 Wash & 2 Rinse Cycles
Water Consumption: 12.0 liters / 3.2US/gal.
Length of Program : 42 min.
SHORT WASH (ECONO MODE)
Water Temperature: (Household Temperature)
Program: 1 Wash & 2 Rinse Cycles
Water Consumption: 9.0 liters / 2.4US/gal.
Length of Program: 29 min.
NORMAL WASH (SANI MODE)
Water Temperature: 160°F (71°C).
Program: 2 Wash & 2 Rinse Cycles
Water Consumption: 12.0 liters / 3.2US/gal.
Length of Program: 47min.
SHORT WASH (SANI MODE)
Water Temperature: 160°F (71°C).
Program: 1 Wash & 2 Rinse Cycles
Water Consumption: 9.0 liters / 2.4US/gal.
Length of Program: 29min.
RINSE (SANI/ECONO) IDEAL FOR GLASSWARE
Water Temperature: (Household Temperature)
Program: 2 Rinse Cycles
Note: the 1st cycle can be
used as a wash cycle.
Water Consumption: 6.0 liters / 1.6US/gal.
Length of Program: 20min.
NOTE: During the 1st cycle of the RINSE program,
the “sani” feature is not activated, irregardless of the
“SANI/ECONO” setting.
6
Pre-Wash Summary
The "Pre-Wash" program is a convenience feature
that allows dishes to be rinsed, when you don't have
a full load ready to be washed. (this prevents foods
from becoming dried/caked on the dishes)
It is not necessary to add detergent during the Pre-
Wash cycle. It is important to make sure the
incoming water is hot. Open the hot water faucet and
run till hot, before connecting the dishwasher.
NOTE: At the beginning of all programs, the
dishwasher starts in "drain" mode.
The drain pump always retains a small amount of
water (in the sump) from the previous cycle. This
is necessary to keep the pump primed. Don't be
alarmed if you see small amounts of water being
pumped-out from the drain hose prior to the start
of the cycle, and/or water remaining in the sump
area at the end of the cycle. (THIS IS NORMAL)
Sani/Econo Summary
The "Sani" feature utilizes a heating element to boost
(increase) temperature of the wash water upto 160°F
(71°C).
To activate this feature, push the "Sani/Econo"
button on the control panel.
• The red indicator light adjacent to the button
illuminates, indentifying the Sani feature is
selected.
To deactivate the Sani feature, push the
“Sani/Econo” button again and the indicator light
turns off.
• If you elect to use the “Econo” feature,
(no indicator light) dishes are washed using
standard (household) hot water only.
We recommend a minimum (household) water
temperature setting of 120°F (49°C) otherwise
washability may be compromised.
SPECIAL NOTE: During the final rinse cycle of
the NORMAL/SHORT/RINSE programs, the
heating element is activated automatically,
irregardless of the “Sani/Econo” setting. This
feature provides optimum conditions for
dispursement of the rinse agent and accelerates
the drying time of the dishes.
PROGRAM SUMMARY
PRE-WASH (ECONO MODE)
Water Temperature: (Household Temperature)
Program: 1 Rinse Cycle
Water Consumption: 3.0 liters / 0.79US/gal.
Length of Program : 6min.