Danby DDW396W Dishwasher User Manual


 
2
When loading items to be washed:
Locate sharp items so that they are not likely to
damage the door seal or cause personal injury.
Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent.
For plastic items not so marked, check the
manufacturer's recommendations.
Do not touch the heating element (under tub filter)
during or immediately after use.
Do not operate your dishwasher unless all
enclosure panels are properly in place.
Do not tamper with controls.
Do not abuse, sit on, or stand on the door or
dish-rack of the dishwasher.
To reduce the risk of injury, do not allow children to
play near the dishwasher.
Under certain conditions, hydrogen gas may be
produced in a hot-water system that has not been
used for two weeks or more.
HYDROGEN GAS IS
EXPLOSIVE. If the hot-water system has not been
used for such a period, before using the
dishwasher, turn on all hot-water faucets and let
the water flow from each for several minutes. This
will release any accumulated hydrogen gas.
Hydrogen Gas is flammable, do not smoke or use
open flame during this time.
IMPORTANT: When removing/discarding your old
dishwasher, always follow basic safety
precautions; Remove the door from the cabinet.
If it is not possible to remove the door, dismantle
and/or disable the door lock mechanism. This will
prevent children from being accidentally trapped
inside.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using your dishwasher, always follow basic
safety precautions
Read all instructions thoroughly before
using the dishwasher.
Use the dishwasher only for its intended
function.
Use only approved dishwasher detergents or
wetting agents recommended for use in
dishwashers. Keep them out of the reach of
children.
SAVE THESE INSTRUCTIONS
Electrical Instructions:
Electrical requirements to operate this appliance are
120 volts AC/60 Hz.
For your personal safety, this appliance must be
grounded. This appliance is equipped with a power
cord having a 3-prong grounded plug. To minimize
possible shock hazards it must be plugged into a
matching 3-prong grounded electrical outlet.
Grounding Instructions:
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current. This appliance is
equipped with a cord having an equipment-
grounding conductor and grounding plug. The plug
must be connected to an appropriate outlet that is
installed and grounded in accordance with all local
codes and ordinances.
WARNING
Instructions pertaining to the risk of fire,
electric shock, or injury to persons.
3-Prong
grounding
Type
Receptacle
Power
Supply
Cord
3-Prong
Grounding
Plug